On May 5, 2026, the Malaysian Communications and Multimedia Commission (MCMC) officially registered two new technical codes: MCMC MTSFB TC T022:2026, which sets baseline requirements for all communications equipment, and MCMC MTSFB TC T007:2026, which provides updated specifications for Short Range Devices (SRDs). Both codes were developed by the Malaysian Technical Standards Forum Bhd (MTSFB) and are now mandatory for relevant equipment in Malaysia.

The Baseline Requirements code (TC T022:2026) establishes minimum operational, general, and technical requirements for communications equipment, including marking, interoperability, electrical safety, electromagnetic compatibility (EMC), Internet Protocol version 6 (IPv6), Specific Absorption Rate (SAR), and power density. It references key international standards such as IEC 62368-1 for safety and ETSI EN 301 489-1 for EMC, and applies to all communications equipment, including user devices, network facilities, and radiocommunications equipment.

The SRD Specifications code (TC T007:2026) updates frequency bands, output power, and spurious emission limits for a wide range of short range devices, aligning with the latest MCMC Class Assignments and industry requirements. It provides detailed technical tables for various device types, including medical implants, RFID, wireless microphones, and automotive radar sensors. Marking, interoperability, EMC, and safety requirements for SRDs are now referenced to the baseline code (TC T022:2026).

Both codes are immediately effective and are required for product certification and market access in Malaysia. Manufacturers, importers, and test labs must ensure compliance with the new requirements, update technical documentation, and follow the specified standards for testing and marking. Certification agencies will assess conformity and conduct gap analyses as part of the approval process.

These regulatory updates strengthen Malaysia’s technical framework for communications equipment, ensuring safety, interoperability, and alignment with international standards, while providing clarity for industry stakeholders.

This is a High Impact regulatory update.

Key reasons for high impact:

• Mandatory new technical codes for all communications equipment and short range devices.
• Broad scope covering operational, safety, EMC, RF, SAR, and marking requirements.
• Immediate effect for certification, importation, and market access.
• Updates to frequency bands, power limits, and test standards for SRDs.

Who is affected?

Manufacturers, importers, certification bodies, test laboratories, network operators, and suppliers of communications and SRD equipment.

Conclusion:

All stakeholders must review and update compliance processes, technical documentation, and product designs to meet the new requirements for continued market access in Malaysia.