We reinforce that the use of the conformity mark for OMD (ISO13485) and OCS (9001) is voluntary. However, when used, it is necessary to follow the rules set by the NCC based on the corresponding regulations.

Guidelines for the Conformity Mark

1. The conformity mark to be used is provided by NCC in CorelDraw and PDF format.
2. There must be no dimensional reduction of conformity marks provided by NCC. Any enlargement, if necessary, must be done proportionally.

Usage Restrictions

This mark of conformity must not:

1. Be used on products, packaging, and/or product instruction manuals.
2. Be used in any other way that indicates the product is certified.

Acceptable Uses

This mark of conformity can:

1. Be used on websites, as long as it is clear that the corresponding manufacturing unit's management system is certified and in force.
2. Be used in email signatures, as long as it is clear that the management system of the corresponding manufacturing unit is certified and in force.

The disclosure of the corresponding certificate may be published on internet sites, provided that it is clear that the management system of the corresponding manufacturing unit is certified and in force.

New link - https://www.nccgroup.com.br/informativos/ncc-news-uso-da-marca-da-conformidade-para-omd-iso13485-e-ocs-9001/