Announcement of New Resolution
On July 30th, 2018, the Ministry of Transport and Telecommunications of Chile announced Resolution N.1.557, 2018, replacing Resolution N.1.985 of 2017. This resolution came into effect on the same date.
Key Changes
- RFID equipment can operate in the 915 to 928 MHz bands, as well as in the 913 to 919 MHz and/or 925 to 928 MHz bands.
- The following frequency bands can operate:
- 2,400 to 2,483.5 MHz
- 5,250 to 5,350 MHz
- 5,470 to 5,725 MHz
- 5,725 to 5,850 MHz with a maximum radiated power of 1 W. This equipment must operate with a minimum bandwidth of 10 MHz and allow frequency sharing.
- The 5,150 to 5,250 MHz frequency bands can operate with a maximum radiated power of 200 mW and a maximum power density of 10 mW/MHz.
- The bands from 915 to 928 MHz may operate with a maximum radiated power of 500 mW.
- The 913 to 919 MHz and 925 to 928 MHz bands are also permitted for operation.
- Equipment is allowed to operate in the 57 to 66 GHz band, with a maximum EIRP of 40 dBm and a maximum spectral power density of 13 dBm/MHz.
- Frequency bands from 57 to 71 GHz are accessible for operation.
- The 169.4 to 169.475 MHz bands can operate with a maximum radiated power of 500 mW.
Important Notice
The 57 to 71 GHz band does not permit the use of equipment designed for aircraft, satellites, and sensors due to potential interference, including vehicle radar systems, unless the sensors are designated for fixed operations or interactive motion detection.
For more information, please contact info@orbiscompliance.com - mailto:info@orbiscompliance.com or (408) 465-7331.
Based on the SUBTEL website.